How to maintain the car mold daily?

As an important production tool, automobile mold undertakes the important task of manufacturing automobile parts. Proper maintenance and maintenance of automotive molds can not only improve the service life of the molds, but also ensure the quality and production efficiency of automotive parts. Here is to introduce the maintenance method of automobile mold.

First of all, we should do a good job of daily cleaning of the car mold. In the process of use, there are often impurities such as oil stains and dust on the surface of the mold, which may cause damage to the mold. Therefore, the cleaning of the mold should be carried out regularly. Professional cleaning agents and soft brushes can be used when cleaning, do not use hard objects to clean the mold, so as not to scratch the surface of the mold. After cleaning, the mold should be dried in time, which can be dried by ventilation or by using a hair dryer.

Secondly, pay attention to the anti-rust work of the mold. Car molds are usually made of metal materials, metal materials are prone to moisture oxidation, resulting in rust. In order to prevent rust, you can apply a layer of anti-rust oil or other professional anti-rust agents on the surface of the mold. In winter or when not used for a long time, the mold can also be placed in a dry and ventilated place and sealed with materials such as plastic sheets to prevent moisture intrusion.

Thirdly, regular lubrication maintenance should be carried out. Sliding parts and thread parts in automotive molds need to be lubricated frequently to reduce friction and wear. For areas coated with lubricating grease, the status of lubricating grease should be checked frequently, and new grease should be added or replaced in time. When adding lubricating grease, pay attention to the use of appropriate ways and tools, so as not to pollute the environment or cause damage to the mold.

After the most, it is also necessary to regularly check the use of the mold. In the process of use, the mold may have some problems, such as wear, deformation, cracks, etc. If these problems are not found and solved in time, it will affect the use effect and life of the mold. Therefore, the mold should be checked regularly, and the mold should be repaired or replaced in time when the problem is found. At the same time, it is also necessary to pay attention to the storage mode and environmental conditions of the mold to avoid long-term exposure to high temperature, humidity or corrosive gases, so as to avoid damage to the mold.

In short, as an important production tool, automobile mold needs to be well maintained and maintained. Through the correct cleaning, rust prevention, lubrication and regular inspection and other measures, can extend the service life of the mold, improve production efficiency and product quality. For automobile manufacturing enterprises, the rational use and maintenance of automobile molds is an important means to improve competitiveness and reduce production costs. Therefore, everyone should carry out the correct maintenance of the car mold to play its maximum role.